new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Oct 1

HYPIC: Accelerating Hybrid-Attention LLM Serving with Position-Independent Caching

In retrieval-augmented generation and agentic LLM serving, prompts are assembled from independent segments into long contexts, making the prefill stage dominate per-request cost. Two directions have emerged to reduce this cost: position-independent caching (PIC) admits KV reuse for non-contiguous segments shared across requests, while hybrid-attention models cut computation by replacing most full-attention layers with linear attention. However, they cannot coexist: applying existing PIC methods to hybrid-attention models breaks down because per-token KV-cache reuse primitives do not transfer to the per-request recurrent state. We present Hypic, the first system to accelerate hybrid-attention LLM serving with position-independent caching. For linear-attention layers, we identify the segment-cumulative transition operator as the missing algebraic primitive and cache it alongside each segment's zero-start end-state, enabling near-exact and constant-time composition of independently cached segments. For the remaining full-attention layers, existing PIC methods also fail because linear layers do not expose the per-token hidden states needed for selective recomputation. We show that the largest deviations concentrate at segment beginnings and construct a small seam window that propagates hidden states through the hybrid-attention stack to repair cross-segment attention. Finally, Hypic introduces segment parallelism, which exploits PIC's segment-level self-containment to parallelize cache-miss prefill across instances, turning long cold requests into an accelerable workload. Evaluated across four hybrid-attention models and five workloads, Hypic reduces time-to-first-token by 3.25times on average and improves QPS by 1.66times over Prefix Cache, while preserving task quality with a 1.71-point gap from Full Recompute.

  • 7 authors
·
Jul 11

Solar Open 2 Technical Report

We present Solar Open 2, a 250B-A15B Mixture-of-Experts language model built for long-horizon agentic tasks, scaled up from Solar Open 1 (Solar Open 100B). To hold entire agent trajectories in a single context, Solar Open 2 reaches a 1M-token window through a hybrid attention stack that interleaves one softmax layer among every three linear-attention layers, using no positional encoding and a gated delta rule extended to negative eigenvalues. To train at this scale under a fixed compute budget, we make training efficient in two ways: a stronger starting point, and higher-value data. For the starting point, we initialize Solar Open 2 from Solar Open 1, transferring the 5.69B-parameter shared skeleton that survives the architectural change and learning everything else through full pre-training. For the data, we curate for value per token: quality- and rarity-aware data curation and mixture-ratio optimization refine a 20T pool into a 10T mixture that, at equal token budget, outperforms the Solar Open 1 recipe. To build its agent skills, we train twelve domain specialists across purpose-built scenarios, then consolidate them into a single model by Multi-teacher On-Policy Distillation (MOPD). Against comparably sized open-weight models on English benchmarks, Solar Open 2 leads on MMLU-Pro, LiveCodeBench, and the APEX-Agents agentic suite, and stays competitive with the strongest (DeepSeek-V4-Flash and MiMo-V2.5) elsewhere. On Korean benchmarks, Solar Open 2 records the highest average of any model compared, including fast-tier closed APIs, and on Ko-GDPval, an in-house Korean officework-agent benchmark, it is competitive with DeepSeek-V4-Pro (1.6T) at less than a sixth of its size.

  • 53 authors
·
Jul 23

SANA-Video 2.0: Hybrid Linear Attention with Attention Residuals for Efficient Video Generation

We introduce SANA-Video 2.0, a hybrid video diffusion transformer instantiated at 5B and 14B scales under a unified architecture. Designed to generate high-quality video up to 720p on a single GPU, SANA-Video 2.0 matches full-softmax video DiTs in quality while retaining the favorable long-sequence scaling of linear attention. To avoid quadratic attention throughout, Hybrid Linear-Softmax Attention combines gated linear attention for O(N)-dominated mixing with periodic gated-softmax anchors at a 3:1 ratio, restoring the full-rank token interactions that pure linear attention lacks. To propagate these refreshed representations across depth, Block Attention Residuals (AttnRes) route completed block summaries into later linear layers, enabling anchor-feature reuse and boosting deep-layer effective rank by ~12%. Through from-scratch training, SANA-Video 2.0 learns the complete hybrid directly rather than linearizing pretrained models, with reduced-resolution proxy studies establishing 25% softmax as the optimal quality-efficiency trade-off. With 40-step sampling, SANA-Video 2.0 achieves a VBench score of 84.30 in 13.2s at 480p on a single H100, remaining competitive with far larger softmax video DiTs at a fraction of the latency. Its compiled DiT forward pass is 3.2x faster than a matched full-softmax baseline at 720p/60s, a gap that expands with video duration. Furthermore, full-stack Sol-Engine optimization (kernel fusion, caching, and sparse attention) accelerates this hardware-friendly backbone by a further 3.58x, bringing the 5B pipeline to 13.06s at 720p/5s and making it 120x faster than Wan 2.2-A14B on one H100. Overall, our hybrid design recovers softmax-level expressiveness at substantially reduced cost, unlocking scalable long, high resolution video generation.

nvidia NVIDIA
·
Jul 22 5

Kairos: A Native World Model Stack for Physical AI

World models are transitioning from passive visual generators to foundational, operational infrastructure for Physical AI: they must natively acquire world knowledge from heterogeneous experience, maintain persistent states over long horizons, and execute efficiently within real deployment constraints. We introduce Kairos, a native world model stack designed around these requirements. (1) Kairos learns the world by pioneering a Native Pre-training Paradigm governed by a Cross-Embodiment Data Curriculum, which organizes open-world videos, human behavioral data, and robot interactions into a progressive developmental pathway. (2) Kairos maintains the world by unified world understanding, generation, and prediction within a Native Unified Architecture equipped with Hybrid Linear Temporal Attention, where sliding-window attention captures local dynamics, dilated sliding windows capture mid-range dependencies, and gated linear attention maintains persistent global memory. We establish formal theoretical bounds demonstrating that this temporal factorization strictly limits error accumulation, mathematically guaranteeing state propagation across extended horizons. (3) Kairos runs the world by incorporating a Deployment-Aware System Co-Design to support low-latency rollout generation on server and consumer-grade hardware for real-world observation-action-feedback loops. Experiments on embodied world-model, long-horizon, and action-policy benchmarks show that Kairos achieves top level performance while offering a strong efficiency-capability trade-off. Together, these results position Kairos as a cohesive operational foundation for future self-evolving physical intelligence.

  • 24 authors
·
Jun 15 4

Medical Image Classification with KAN-Integrated Transformers and Dilated Neighborhood Attention

Convolutional networks, transformers, hybrid models, and Mamba-based architectures have demonstrated strong performance across various medical image classification tasks. However, these methods were primarily designed to classify clean images using labeled data. In contrast, real-world clinical data often involve image corruptions that are unique to multi-center studies and stem from variations in imaging equipment across manufacturers. In this paper, we introduce the Medical Vision Transformer (MedViTV2), a novel architecture incorporating Kolmogorov-Arnold Network (KAN) layers into the transformer architecture for the first time, aiming for generalized medical image classification. We have developed an efficient KAN block to reduce computational load while enhancing the accuracy of the original MedViT. Additionally, to counteract the fragility of our MedViT when scaled up, we propose an enhanced Dilated Neighborhood Attention (DiNA), an adaptation of the efficient fused dot-product attention kernel capable of capturing global context and expanding receptive fields to scale the model effectively and addressing feature collapse issues. Moreover, a hierarchical hybrid strategy is introduced to stack our Local Feature Perception and Global Feature Perception blocks in an efficient manner, which balances local and global feature perceptions to boost performance. Extensive experiments on 17 medical image classification datasets and 12 corrupted medical image datasets demonstrate that MedViTV2 achieved state-of-the-art results in 27 out of 29 experiments with reduced computational complexity. MedViTV2 is 44\% more computationally efficient than the previous version and significantly enhances accuracy, achieving improvements of 4.6\% on MedMNIST, 5.8\% on NonMNIST, and 13.4\% on the MedMNIST-C benchmark.

  • 5 authors
·
Feb 19, 2025 1

Linear Attention Architectures: Mechanisms, Trade-offs, and Cross-Layer Routing

Self-attention lets each token retrieve information from the full context, but its quadratic cost in sequence length limits training and inference at long context. This paper presents a comparative study of softmax attention and four recent recurrent linear-attention architectures: DeltaNet, Gated DeltaNet, Kimi Delta Attention, and Gated DeltaNet-2. We express these mechanisms in a common recurrent-memory notation, making explicit how they differ in expressivity, memory decay, erase and write control, training throughput, and implementation complexity. Our experiments center on 350M-parameter models trained for 15B tokens, and include optimizer and learning-rate comparisons, hybrid-versus-pure stack comparisons, sequence-length runtime measurements, larger DeltaNet runs at 1.3B and 3B parameters, and a small set of downstream evaluations. The reported speed results measure training throughput and iteration time; we do not provide an empirical inference-speed benchmark. Within the reported 350M-parameter, 15B-token sweep, Kimi Delta Attention with Muon reaches the lowest final validation loss, a pure Gated DeltaNet stack trained with AdamW has the highest normalized training throughput, hybrid stacks generally improve loss at a throughput cost, and Muon consistently lowers final validation loss relative to AdamW in the matched architecture settings we evaluate. We introduce and evaluate lightweight cross-layer routing mechanisms for DeltaNet-style memories. The most natural DeltaNet-inspired formulation, forwarding a lower layer's delta-rule write error into the next layer's value target, does not improve over matched baselines. Routing into the aligned hidden stream and forwarding the write value instead yields a modest improvement in the matched runs we report: Cross-Layer Value Routing (CLVR) lowers final validation loss for both DeltaNet and Gated DeltaNet.

ethz ETH Zurich
·
Jul 7 2

Astroformer: More Data Might not be all you need for Classification

Recent advancements in areas such as natural language processing and computer vision rely on intricate and massive models that have been trained using vast amounts of unlabelled or partly labeled data and training or deploying these state-of-the-art methods to resource constraint environments has been a challenge. Galaxy morphologies are crucial to understanding the processes by which galaxies form and evolve. Efficient methods to classify galaxy morphologies are required to extract physical information from modern-day astronomy surveys. In this paper, we introduce Astroformer, a method to learn from less amount of data. We propose using a hybrid transformer-convolutional architecture drawing much inspiration from the success of CoAtNet and MaxViT. Concretely, we use the transformer-convolutional hybrid with a new stack design for the network, a different way of creating a relative self-attention layer, and pair it with a careful selection of data augmentation and regularization techniques. Our approach sets a new state-of-the-art on predicting galaxy morphologies from images on the Galaxy10 DECals dataset, a science objective, which consists of 17736 labeled images achieving 94.86% top-1 accuracy, beating the current state-of-the-art for this task by 4.62%. Furthermore, this approach also sets a new state-of-the-art on CIFAR-100 and Tiny ImageNet. We also find that models and training methods used for larger datasets would often not work very well in the low-data regime.

  • 1 authors
·
Apr 3, 2023

HydraHead: From Head-Level Functional Heterogeneity to Specialized Attention Hybridization

The quadratic complexity of attention poses a critical bottleneck for long-context processing, spurring interest in hybrid attention designs. Most open-source hybrid models adopt a layer-wise strategy. Yet, prior work has noted the inherent difficulty of integrating Linear Attention (LA) with Full Attention (FA), suggesting that the design space of attention hybridization remains underexplored. To probe this space, we conduct interpretability analysis and observe that layers exhibit block-wise functional similarity, while individual heads within the same layer display distinct functional specialization despite sharing input features. This head-level heterogeneity suggests that the head dimension provides a natural and principled granularity for fusing heterogeneous attention signals. Building on this insight, we introduce HydraHead, a novel architecture that hybridizes FA and LA along the head axis. HydraHead features two key innovations: (1) an interpretability-driven selection strategy that identifies retrieval-critical heads and preserves FA only for them, and (2) a scale-normalized fusion module that reconciles the distributional gap between FA and LA head outputs. By leveraging a three-stage transfer pipeline with parameter reuse and distillation, we achieve high-performance hybrid models with minimal training overhead. Under a unified training setup, HydraHead outperforms other hybrid designs in long-context tasks while maintaining strong general reasoning. With interpretability-driven head selection, it matches a 3:1 layer-wise hybrid's long-context performance at a 7:1 LA-to-FA ratio. Crucially, trained on only 15B tokens, HydraHead achieves over 69% improvement over the baseline at 512K context length, approaching Qwen3.5, a leading model of comparable size with a native context length of 256K. This highlights the significant scaling potential of head-level hybridization.

  • 7 authors
·
Jun 17 1

Morphing into Hybrid Attention Models

Hybrid attention models improve long-context efficiency by retaining only a subset of full-attention layers and replacing the remaining layers with linear attention. However, the effectiveness of Transformer-to-hybrid conversion critically depends on which layers preserve full attention. Existing hybrid layer selection methods typically rely on heuristic strategies such as fixed placement patterns or layerwise scoring, implicitly treating layer importance as isolated and overlooking the interdependent layer effect under a global hybrid configuration. In this work, we formulate hybrid layer selection as a budget-constrained subset optimization problem. We further propose FlashMorph (Fast LAyer Selection for Hybrid MORPHing), an effective, efficient and scalable layer selection method for Transformer-to-hybrid conversion. FlashMorph first constructs a morphable model by equipping each full-attention layer with a converted linear-attention branch. It then freezes all model weights and jointly optimizes layerwise gates on synthetic long-context retrieval data, with a linearization regularization that encourages the model to rely on linear attention for efficiency. The learned gates are discretized under a preset full-attention budget to instantiate the hybrid architecture, followed by standard logits distillation and long-context finetuning. Extensive experiments show that FlashMorph discovers more effective hybrid configurations, preserves strong long-context recall and general benchmark performance while substantially reducing layer selection cost compared with existing layer selection methods, demonstrating its effectiveness, efficiency, and scalability.

DASH: Fast Differentiable Architecture Search for Hybrid Attention in Minutes on a Single GPU

Hybrid attention architectures are becoming an increasingly important paradigm for improving LLM inference efficiency while preserving model quality, making hybrid architecture design a central problem. Existing designs often rely on manual empirical rules or proxy-based selector signals for layer-wise operator allocation. Recent NAS-style systems such as Jet-Nemotron demonstrate the promise of automated hybrid architecture search. However, Jet-Nemotron's PostNAS search stages alone use 200B tokens, making such search pipelines difficult to use as routine methods for hybrid architecture design. We introduce DASH, a fast differentiable search framework for hybrid attention architecture design, which relaxes discrete layer-wise attention operator placement into continuous architecture logits, prepares reusable teacher-aligned linear candidates, and performs architecture-only search with model and operator weights frozen to significantly enhance search efficiency. On Qwen2.5-3B-Instruct, DASH consistently outperforms a comprehensive suite of existing selector-style hybrid attention design baselines, showing that direct differentiable search can discover stronger hybrid architectures. Moreover, DASH achieves stronger RULER performance than released Jet-Nemotron models while remaining competitive on overlapping short-context and general benchmarks. Notably, each DASH search run uses only 12.3M tokens and takes about 20 minutes on a single RTX Pro 6000 GPU, corresponding to merely 0.006% of the PostNAS search tokens reported by Jet-Nemotron. These results suggest that high-quality hybrid attention architectures can be obtained through minutes-level differentiable search, providing a promising direction for hybrid architecture design.

  • 6 authors
·
May 19

Flux Attention: Context-Aware Hybrid Attention for Efficient LLMs Inference

The quadratic computational complexity of standard attention mechanisms presents a severe scalability bottleneck for LLMs in long-context scenarios. While hybrid attention mechanisms combining Full Attention (FA) and Sparse Attention (SA) offer a potential solution, existing methods typically rely on static allocation ratios that fail to accommodate the variable retrieval demands of different tasks. Furthermore, head-level dynamic sparsity often introduces severe computational load imbalance and synchronization long-tails, which hinder hardware acceleration during autoregressive decoding. To bridge this gap, we introduce Flux Attention, a context-aware framework that dynamically optimizes attention computation at the layer level. By integrating a lightweight Layer Router into frozen pretrained LLMs, the proposed method adaptively routes each layer to FA or SA based on the input context. This layer-wise routing preserves high-fidelity information retrieval while ensuring contiguous memory access, translating theoretical computational reductions into practical wall-clock speedups. As a parameter-efficient approach, our framework requires only 12 hours of training on 8timesA800 GPUs. Extensive experiments across multiple long-context and mathematical reasoning benchmarks demonstrate that Flux Attention achieves a superior trade-off between performance and inference speed compared with baseline models, with speed improvements of up to 2.8times and 2.0times in the prefill and decode stages.

Component Ablation for Efficient Hybrid Language Model Architectures: Performance, Resilience, and Compression Implications

Hybrid language models combine softmax attention with linear-time sequence mechanisms such as state-space or linear-attention layers, but the functional contribution of each component type remains insufficiently characterized. We study component-level ablation in two sub-1B hybrid language models, Qwen3.5-0.8B and Falcon-H1-0.5B, using likelihood-based evaluation, downstream benchmarks, layer-wise interventions, random controls, and representation-level diagnostics. Across the tested models, removing either attention or the alternative sequence-processing pathway substantially degrades performance, indicating that both component types contribute to model behavior. Likelihood metrics are especially sensitive to the linear-attention or state-space pathway, while downstream benchmark degradation depends on task and architecture. Layer-wise ablations show that component importance is position-dependent, with the strongest effects concentrated in early or mid-network components rather than uniformly across depth. Random-removal controls further show that hybrid architectures and same-family Transformer baselines degrade differently under structural perturbation. These results suggest that component ablation is a useful diagnostic for understanding hybrid language model architectures. The findings provide evidence relevant to efficient model design, compression, robustness analysis, and deployment decisions in architectures that combine attention with alternative sequence-processing mechanisms.

  • 3 authors
·
Jun 4

A Systematic Analysis of Hybrid Linear Attention

Transformers face quadratic complexity and memory issues with long sequences, prompting the adoption of linear attention mechanisms using fixed-size hidden states. However, linear models often suffer from limited recall performance, leading to hybrid architectures that combine linear and full attention layers. Despite extensive hybrid architecture research, the choice of linear attention component has not been deeply explored. We systematically evaluate various linear attention models across generations - vector recurrences to advanced gating mechanisms - both standalone and hybridized. To enable this comprehensive analysis, we trained and open-sourced 72 models: 36 at 340M parameters (20B tokens) and 36 at 1.3B parameters (100B tokens), covering six linear attention variants across five hybridization ratios. Benchmarking on standard language modeling and recall tasks reveals that superior standalone linear models do not necessarily excel in hybrids. While language modeling remains stable across linear-to-full attention ratios, recall significantly improves with increased full attention layers, particularly below a 3:1 ratio. Our study highlights selective gating, hierarchical recurrence, and controlled forgetting as critical for effective hybrid models. We recommend architectures such as HGRN-2 or GatedDeltaNet with a linear-to-full ratio between 3:1 and 6:1 to achieve Transformer-level recall efficiently. Our models are open-sourced at https://huggingface.co/collections/m-a-p/hybrid-linear-attention-research-686c488a63d609d2f20e2b1e.

  • 11 authors
·
Jul 8, 2025 1

Retrofitting Linear Attention into Diffusion Language Models

Diffusion language models (dLLMs) offer a promising alternative to autoregressive models by accelerating inference through parallel decoding. Recent dLLMs commonly use blockwise semi-autoregressive decoding, generating blocks autoregressively while denoising tokens within each active block in parallel. However, despite KV caching, each denoising step still attends to all previous blocks, repeatedly incurring prefix-attention cost. Motivated by this bottleneck, we ask whether dLLM inference can be further accelerated by linearizing attention over previous blocks. We introduce block-hybrid attention, which retains exact softmax attention within the active denoising block while applying linear attention over previous blocks. We show that this hybrid attention can be retrofitted into a pretrained dLLM with minimal post-training: LLaDA-Hybrid replaces 6 of the 20 attention layers in LLaDA~2.1, a 16B open-source dLLM, largely following LoLCAT (Zhang et al, 2024). The conversion takes only approximately 60 hours while preserving benchmark performance: 72.0% vs. 75.6% on HumanEval, 63.0% vs. 57.7% on MBPP+, and 86.7% vs. 88.3% on CMATH. With a Triton implementation, LLaDA-Hybrid achieves up to 1.7times higher decoding throughput and supports more concurrent requests before exhausting memory, showing that pretrained dLLMs can be efficiently linearized for faster inference. Our code is available at: https://github.com/Diuven/LLaDA-Hybrid.

  • 3 authors
·
Aug 5

When to Think Fast and Slow? AMOR: Adaptive Entropy Gate for Hybrid Models

Recurrent-attention hybrids aim to combine the efficiency of recurrence with the expressivity of attention, but existing approaches typically apply attention uniformly across all positions, even when the recurrent state alone is sufficient for accurate prediction. We introduce AMOR (Adaptive Metacognitive Output Router), a post-hoc hybrid architecture that selectively invokes attention based on predictive uncertainty. A recurrent backbone is augmented with entropy-gated attention blocks that activate only when the model's output entropy exceeds a dynamic threshold derived from a running batch median and scaled standard deviation. This yields a simple, gradient-free routing mechanism inspired by uncertainty-driven computation and the System 1 / System 2 distinction. Across Mamba2 and Gated DeltaNet backbones (180M-1.5B), AMOR consistently matches or outperforms both pure recurrent models and fixed-schedule hybrid baselines while invoking attention on only ~22% of tokens. It achieves strong performance on common-sense reasoning benchmarks and maintains stable long-context performance on LongBench, where prior hybrid models degrade under distribution shift. These results suggest that when attention is applied matters as much as how much: selectively allocating attention based on predictive uncertainty improves both efficiency and robustness, offering a simple alternative to uniform or fixed routing strategies and pointing toward adaptive hybrid architectures that dynamically match computation to input difficulty.

  • 2 authors
·
May 12

Multi-Mixer Models: Flexible Sequence Modeling with Shared Representations

Softmax attention is the cornerstone of modern large language models, but its memory scales linearly and compute quadratically with sequence length. Linear recurrent models, such as linear attention and state space models, have become widely studied as alternatives to attention due to their linear compute and constant memory. While these sub-quadratic token mixing methods, or mixers, achieve promising efficiency gains and competitive results on a wide range of benchmarks, current linear recurrent models still lag behind on tasks that require long-context retrieval or in-context learning. A growing body of work studies hybrid architectures that attempt to mitigate these trade-offs by statically interleaving or merging attention and recurrent blocks. In this work, we explore a new axis of developing hybrid models: across the token sequence. We propose Oryx, a hybrid model that can, throughout a sequence, flexibly switch between different mixers, for example quadratic attention for rich context utilization and linear recurrences for efficient generation. Oryx ties at least 90% of its parameters across mixers, enabling attention and recurrent modes to operate over shared internal representations. We validate our design with Mamba-2 and Gated DeltaNet variants, up to 1.4B models. Under fixed token budgets and a mixed-training strategy, Oryx achieves comparable or better performance than its single-mixer baselines. At the 1.4B scale, all instances of Oryx outperform their respective baselines by at least 0.7 percentage points on averaged language modeling tasks. On retrieval tasks, Oryx achieves performance comparable to the Transformer baseline even when processing only a tiny fraction (<10%) of the tokens in attention mode. These results suggest that attention and linear recurrent models can share internal representations, and motivate sequence-axis hybridization as a promising direction.

  • 4 authors
·
May 26

MoH: Multi-Head Attention as Mixture-of-Head Attention

In this work, we upgrade the multi-head attention mechanism, the core of the Transformer model, to improve efficiency while maintaining or surpassing the previous accuracy level. We show that multi-head attention can be expressed in the summation form. Drawing on the insight that not all attention heads hold equal significance, we propose Mixture-of-Head attention (MoH), a new architecture that treats attention heads as experts in the Mixture-of-Experts (MoE) mechanism. MoH has two significant advantages: First, MoH enables each token to select the appropriate attention heads, enhancing inference efficiency without compromising accuracy or increasing the number of parameters. Second, MoH replaces the standard summation in multi-head attention with a weighted summation, introducing flexibility to the attention mechanism and unlocking extra performance potential. Extensive experiments on ViT, DiT, and LLMs demonstrate that MoH outperforms multi-head attention by using only 50%-90% of the attention heads. Moreover, we demonstrate that pre-trained multi-head attention models, such as LLaMA3-8B, can be further continue-tuned into our MoH models. Notably, MoH-LLaMA3-8B achieves an average accuracy of 64.0% across 14 benchmarks, outperforming LLaMA3-8B by 2.4% by utilizing only 75% of the attention heads. We believe the proposed MoH is a promising alternative to multi-head attention and provides a strong foundation for developing advanced and efficient attention-based models.

  • 4 authors
·
Oct 15, 2024 2

Long-Horizon Streaming Video Generation via Hybrid Attention with Decoupled Distillation

Streaming video generation (SVG) distills a pretrained bidirectional video diffusion model into an autoregressive model equipped with sliding window attention (SWA). However, SWA inevitably loses distant history during long video generation, and its computational overhead remains a critical challenge to real-time deployment. In this work, we propose Hybrid Forcing, which jointly optimizes temporal information retention and computational efficiency through a hybrid attention design. First, we introduce lightweight linear temporal attention to preserve long-range dependencies beyond the sliding window. In particular, we maintain a compact key-value state to incrementally absorb evicted tokens, retaining temporal context with negligible memory and computational overhead. Second, we incorporate block-sparse attention into the local sliding window to reduce redundant computation within short-range modeling, reallocating computational capacity toward more critical dependencies. Finally, we introduce a decoupled distillation strategy tailored to the hybrid attention design. A few-step initial distillation is performed under dense attention, then the distillation of our proposed linear temporal and block-sparse attention is activated for streaming modeling, ensuring stable optimization. Extensive experiments on both short- and long-form video generation benchmarks demonstrate that Hybrid Forcing consistently achieves state-of-the-art performance. Notably, our model achieves real-time, unbounded 832x480 video generation at 29.5 FPS on a single NVIDIA H100 GPU without quantization or model compression. The source code and trained models are available at https://github.com/leeruibin/hybrid-forcing.

  • 7 authors
·
Apr 27

RAT: Bridging RNN Efficiency and Attention Accuracy in Language Modeling

Transformers have become the cornerstone of modern large-scale language models; however, their dependence on softmax attention poses a major computational bottleneck, particularly in long-context settings. In this work, rather than following prevalent approaches such as linear attention (or SSMs) and local attention, we introduce an intermediate design called \rat between recurrence and attention mechanisms. It partitions the input into chunks, applies a simple linear recurrence within each chunk to capture local dependencies, and then performs softmax attention across chunks to model long-range interactions. By adjusting the size of the chunk, \rat enables flexible trade-offs, combining the strengths of RNN and attention. Empirically, with a chunk size of 16, the \rat layer achieves a \(7\times\) improvement in training speed with 100K token sequences and \(9\times\) in generation at 4K sequence length, while maintaining similar or sometimes even better accuracy compared to standard attention. We demonstrate this by training 1.3B parameter models from scratch and performing large-scale evaluations, including short- and long-context benchmarks, as well as supervised fine-tuning~(SFT). We further propose a hybrid architecture that interleaves \rat with local attention. By combining efficient long-range modeling with strong local interactions, this hybrid design not only improves inference speed and reduces cache memory usage compared to attention, but also consistently enhances performance, for example, achieving an average 1 point gain in commonsense reasoning tasks, up to 4 points on code tasks, and a 1 point Rouge-L increase in a summarization SFT task. Code is available at https://github.com/CLAIRE-Labo/RAT

  • 4 authors
·
Jul 6, 2025

MiniCPM-SALA: Hybridizing Sparse and Linear Attention for Efficient Long-Context Modeling

The evolution of large language models (LLMs) towards applications with ultra-long contexts faces challenges posed by the high computational and memory costs of the Transformer architecture. While existing sparse and linear attention mechanisms attempt to mitigate these issues, they typically involve a trade-off between memory efficiency and model performance. This paper introduces MiniCPM-SALA, a 9B-parameter hybrid architecture that integrates the high-fidelity long-context modeling of sparse attention (InfLLM-V2) with the global efficiency of linear attention (Lightning Attention). By employing a layer selection algorithm to integrate these mechanisms in a 1:3 ratio and utilizing a hybrid positional encoding (HyPE), the model maintains efficiency and performance for long-context tasks. Furthermore, we introduce a cost-effective continual training framework that transforms pre-trained Transformer-based models into hybrid models, which reduces training costs by approximately 75% compared to training from scratch. Extensive experiments show that MiniCPM-SALA maintains general capabilities comparable to full-attention models while offering improved efficiency. On a single NVIDIA A6000D GPU, the model achieves up to 3.5x the inference speed of the full-attention model at the sequence length of 256K tokens and supports context lengths of up to 1M tokens, a scale where traditional full-attention 8B models fail because of memory constraints.

openbmb OpenBMB
·
Feb 12 1

ATMA: Length-Invariant Language Modeling via Polar Attention and Gated-Delta Compression Memory

Modern large language models based on softmax scaled-dot-product attention are constrained by their training sequence length: as the key-value sequence grows, softmax probability mass can dilute across a wider distribution, inducing activation shift and long-context performance collapse. Moreover, long-context language modeling faces a structural tension: a sliding-window attention core maintains a bounded local representation and low perplexity but is blind to long-range dependencies, while full-context attention preserves global recall but suffers from out-of-distribution perplexity explosion. To resolve these limitations, we introduce ATMA, a hybrid convolutional-attention architecture that integrates a novel three-channel attention mechanism. ATMA factorizes the attention mixing step into: (1) a count-blind, unit-vector direction channel, (2) a bounded magnitude channel driven by the participation ratio of effective matches over an extreme-value-corrected null sink, and (3) a long-term recurrent compression memory optimized via a gated-delta fast-weights rule. Neither the Polar Attention core nor the recurrent memory is sufficient alone; their combination enables monotonic perplexity reduction and high-fidelity long-range retrieval simultaneously. We evaluate ATMA using a 100-run factorial ablation sweep, demonstrating that the combined Polar + memory model maintains induction needle-in-a-haystack retrieval accuracy above 90% out to 64K tokens (32 times the training length of 2K) while its document perplexity improves monotonically, outperforming softmax-based memory baselines which collapse at extreme context lengths. Code: https://github.com/kreasof-ai/atma

kreasof-ai Kreasof AI
·
Jun 22

LT2: Linear-Time Looped Transformers

Looped Transformers (LT) have emerged as a powerful architecture by iterating their layers multiple times before decoding the final token. However, pairing them with full attention retains quadratic complexity, making them computationally expensive and slow. We introduce LT2 (Linear-Time Looped Transformers), a family of looped architectures that replace quadratic softmax attention with subquadratic, linear-time attention. We study two variants: LT2-linear with linear attention and LT2-sparse with sparse attention. We find that looping uniquely synergizes with these variants: it enables iterative memory refinement in linear attention and progressively expands the effective receptive field in sparse attention. We formalize these benefits theoretically and demonstrate consistent empirical gains across controlled recall, state-tracking, and language modeling tasks. We then explore LT2-hybrid, which combines different attention variants in a looped setting. Two variants are especially promising: LT2-hybrid (GDN+DSA), which interleaves linear and sparse attention to maximize efficiency and matches the standard looped transformer's quality at fully linear-time cost; and LT2-hybrid (Full+GDN), which interleaves GDN with a small fraction of full attention layers to maximize quality, surpassing the standard looped transformer in both performance and efficiency. We also show how to convert a pre-trained LT into an LT2-hybrid model. With about 1B tokens of training, our converted model, Ouro-hybrid-1.4B, outperforms industry-level 1B models and is competitive with industry-level 4B models while retaining the speed benefits of linear-time attention. Together, these results show a clear path toward making looped transformers more scalable and advancing efficient, capable small language models.

  • 7 authors
·
May 21

FLARE: Diffusion for Hybrid Language Model

Autoregressive (AR) large language models (LLMs) have achieved broad practical success, but sequential decoding remains a key bottleneck for low-latency deployment. Recent efficient-inference work has progressed along two axes: reducing the cost of each model invocation through efficient architectures, and reducing serial decoding steps through parallel generation. Hybrid attention backbones address the former, while diffusion language models (dLLMs) pursue the latter via iterative parallel denoising. Combining these advantages remains challenging: AR-to-dLLM conversion often fails to preserve seed-checkpoint capability, and hybrid-attention recurrent states and masking constraints make diffusion training and serving nontrivial. We present FLARE, a systematic conversion framework for hybrid-attention LLMs. Our analysis identifies transfer data quality as the primary determinant of capability preservation, outweighing loss formulation and attention-mask design. The resulting framework combines a token-equal AR-and-diffusion objective, hardware-aware kernels, and unified inference, enabling one checkpoint to support both AR-style verified decoding and diffusion-style parallel denoising. Starting from strong AR checkpoints with limited post-training data, FLARE is competitive with leading open-source dLLMs across model scales and delivers consistent throughput gains over open-source dLLM baselines in single-GPU concurrent serving. Our results further suggest that practical dLLMs are limited not only by decoding algorithms, but also by transfer data quality and the training inefficiency of current block-diffusion objectives, motivating joint design of data, objectives, architectures, and inference systems.

  • 12 authors
·
May 31

Long-Context Modeling via GSS-Transformer Hybrid Architecture with Learnable Mixing

Modeling long-range dependencies remains a central challenge in natural language processing. Transformer architectures achieve strong performance via self-attention but scale quadratically (O(N^2)) with sequence length, while State Space Models (SSMs) scale linearly (O(N)) but suffer from a selective recall bottleneck, struggling to retrieve precise information from compressed states. This creates a fundamental tradeoff between efficiency and perplexity. To tackle these challenges, we propose the Parallel Hybrid Architecture (PHA), which runs Gated State Spaces (GSS), Grouped Query Attention (GQA), and Feed-Forward Networks (FFNs) as independent parallel branches fused by a learnable mixing mechanism. Instead of forcing SSMs to approximate attention or serializing the two paradigms, PHA allows each branch to specialize: GSS captures global context, while attention performs selective retrieval, with FFN providing complementary processing. On WikiText-103, PHA achieves 16.51 PPL at 125M parameters, outperforming Hedgehog (16.70) and H3-125M (23.70). Scaling to 180M parameters yields 16.42 PPL, which gives comparable results with the pure attention baseline while delivering 24\% higher throughput and up to 40\% lower memory usage at long contexts. On OpenWebText, our 125M model achieves 19.72 PPL, outperforming standard Transformers (20.60) and GSS hybrid baselines (19.80). These results demonstrate that separating sequence modeling paradigms into parallel specialists enables Transformer-level perplexity with substantially improved efficiency for long-context language modeling.

  • 5 authors
·
Jun 14

AllMem: A Memory-centric Recipe for Efficient Long-context Modeling

Large Language Models (LLMs) encounter significant performance bottlenecks in long-sequence tasks due to the computational complexity and memory overhead inherent in the self-attention mechanism. To address these challenges, we introduce AllMem, a novel and efficient hybrid architecture that integrates Sliding Window Attention (SWA) with non-linear Test-Time Training (TTT) memory networks. AllMem enables models to effectively scale to ultra-long contexts while mitigating catastrophic forgetting. This approach not only overcomes the representation constraints typical of linear memory models but also significantly reduces the computational and memory footprint during long-sequence inference. Furthermore, we implement a Memory-Efficient Fine-Tuning strategy to replace standard attention layers in pre-trained models with memory-augmented sliding window layers. This framework facilitates the efficient transformation of any off-the-shelf pre-trained LLM into an AllMem-based architecture. Empirical evaluations confirm that our 4k window model achieves near-lossless performance on 37k LongBench with a marginal 0.83 drop compared to full attention. Furthermore, on InfiniteBench at a 128k context, our 8k window variant outperforms full attention, which validates the effectiveness of our parameterized memory in mitigating noise and maintaining robust long-range modeling without the prohibitive costs of global attention.

  • 8 authors
·
Feb 14

MoA: Mixture of Sparse Attention for Automatic Large Language Model Compression

Sparse attention can effectively mitigate the significant memory and throughput demands of Large Language Models (LLMs) in long contexts. Existing methods typically employ a uniform sparse attention mask, applying the same sparse pattern across different attention heads and input lengths. However, this uniform approach fails to capture the diverse attention patterns inherent in LLMs, ignoring their distinct accuracy-latency trade-offs. To address this challenge, we propose the Mixture of Attention (MoA), which automatically tailors distinct sparse attention configurations to different heads and layers. MoA constructs and navigates a search space of various attention patterns and their scaling rules relative to input sequence lengths. It profiles the model, evaluates potential configurations, and pinpoints the optimal sparse attention compression plan. MoA adapts to varying input sizes, revealing that some attention heads expand their focus to accommodate longer sequences, while other heads consistently concentrate on fixed-length local contexts. Experiments show that MoA increases the effective context length by 3.9times with the same average attention span, boosting retrieval accuracy by 1.5-7.1times over the uniform-attention baseline across Vicuna-7B, Vicuna-13B, and Llama3-8B models. Moreover, MoA narrows the capability gaps between sparse and dense models, reducing the maximum relative performance drop from 9%-36% to within 5% across two long-context understanding benchmarks. MoA achieves a 1.2-1.4times GPU memory reduction and boosts decode throughput by 5.5-6.7 times for 7B and 13B dense models on a single GPU, with minimal impact on performance.

  • 13 authors
·
Jun 21, 2024 4

Attention Editing: A Versatile Framework for Cross-Architecture Attention Conversion

Key-Value (KV) cache memory and bandwidth increasingly dominate large language model inference cost in long-context and long-generation regimes. Architectures such as multi-head latent attention (MLA) and hybrid sliding-window attention (SWA) can alleviate this bound, but integrating them into existing models remains difficult. Prior methods impose fine-grained structural requirements on both source and target attention modules, which cannot meet the feasible requirement in practical deployment. We present Attention Editing, a practical framework for converting already-trained large language models (LLMs) with new attention architectures without re-pretraining from scratch. Attention editing replaces the original attention with a learnable target module and trains it using progressive distillation, consisting of (1) layer-wise teacher-forced optimization with intermediate activation supervision to prevent cold-start error accumulation, and (2) model-level distillation on next-token distributions, optionally regularized by weak feature matching. We instantiate the framework on two different target--MLA and GateSWA, a gated hybrid SWA design, and apply it to Qwen3-8B and Qwen3-30B-A3B. The resulting models maintain competitive performance while delivering substantial efficiency improvements, demonstrating that large-scale attention conversion is both feasible and robust. Notably, experiments are conducted on an Ascend 910B clusters, offering a practical training case study on domestic hardware.

  • 4 authors
·
Apr 6

UniPrefill: Universal Long-Context Prefill Acceleration via Block-wise Dynamic Sparsification

As large language models (LLMs) continue to advance rapidly, they are becoming increasingly capable while simultaneously demanding ever-longer context lengths. To improve the inference efficiency of long-context processing, several novel low-complexity hybrid architectures have recently been proposed, effectively alleviating the computational burden of long-context inference. However, existing research on long-context prefill acceleration remains predominantly focused on sparse attention mechanisms, which achieve their maximum speedup only on full-attention models. When transferred to emerging architectures--such as linear/full attention hybrids or sliding window/full attention hybrids--these prefill acceleration approaches suffer significant performance degradation. Furthermore, such methods are generally incompatible with continuous batching, making them difficult to integrate into modern inference engines such as vLLM. To this end, we propose UniPrefill, a prefill acceleration framework applicable to virtually any model architecture, which directly accelerates the model's computation at the token level. We further implement UniPrefill as a continuous batching operator and extend vLLM's scheduling strategy to natively support prefill-decode co-processing and tensor parallel for UniPrefill, enabling its seamless integration into vLLM. UniPrefill achieves up to 2.1x speedup in Time-To-First-Token (TTFT), with the acceleration becoming increasingly pronounced as the number of concurrent requests grows.

tencent Tencent
·
May 6 2

Long-Context Modeling with Dynamic Hierarchical Sparse Attention for On-Device LLMs

The quadratic cost of attention hinders the scalability of long-context LLMs, especially in resource-constrained settings. Existing static sparse methods such as sliding windows or global tokens utilizes the sparsity of attention to reduce the cost of attention, but poorly adapts to the content-dependent variations in attention due to their staticity. While previous work has proposed several dynamic approaches to improve flexibility, they still depend on predefined templates or heuristic mechanisms. Such strategies reduce generality and prune tokens that remain contextually important, limiting their accuracy across diverse tasks. To tackle these bottlenecks of existing methods for long-context modeling, we introduce Dynamic Hierarchical Sparse Attention (DHSA), a data-driven framework that dynamically predicts attention sparsity online without retraining. Our proposed DHSA adaptively segments sequences into variable-length chunks, then computes chunk representations by aggregating the token embeddings within each chunk. To avoid the bias introduced by varying chunk lengths, we apply length-normalized aggregation that scales the averaged embeddings by the square root of the chunk size. Finally, DHSA upsamples the chunk-level similarity scores to token level similarities to calculate importance scores that determine which token-level interactions should be preserved. Our experiments on Gemma2 with Needle-in-a-Haystack Test and LongBench show that DHSA matches dense attention in accuracy, while reducing prefill latency by 20-60% and peak memory usage by 35%. Compared to other representative baselines such as block sparse attention, DHSA achieves consistently higher accuracy (6-18% relative gains) with comparable or lower cost, offering an efficient and adaptable solution for long-context on-device LLMs.

  • 4 authors
·
Oct 28, 2025

Deconstructing Attention: Investigating Design Principles for Effective Language Modeling

The success of Transformer language models is widely credited to their dot-product attention mechanism, which interweaves a set of key design principles: mixing information across positions (enabling multi-token interactions), sequence-dependent activations (where attention weights adapt to each input), a specific mathematical form (dot-product similarities plus softmax weighting), and coupling of queries and keys to evolving hidden states (grounding attention in the current layer). However, the necessity of each of these principles remains largely untested. In this work, we systematically deconstruct attention by designing controlled variants that selectively relax these principles, applied both uniformly across all layers and in hybrid architectures where only some layers retain standard attention. Our empirical analysis reveals that mechanisms for mixing tokens are indispensable, as their absence collapses models to near-random behavior, while the exact mathematical form and sequence dependency can be substantially relaxed, especially when preserved in just a subset of layers. Surprisingly, even variants that fail in isolation can achieve robust performance when interleaved with standard attention, highlighting a cooperative effect. These findings deepen our understanding of what truly underpins attention's effectiveness and open new avenues for simplifying language models without sacrificing performance.

  • 3 authors
·
Oct 13, 2025 2

Simple linear attention language models balance the recall-throughput tradeoff

Recent work has shown that attention-based language models excel at recall, the ability to ground generations in tokens previously seen in context. However, the efficiency of attention-based models is bottle-necked during inference by the KV-cache's aggressive memory consumption. In this work, we explore whether we can improve language model efficiency (e.g. by reducing memory consumption) without compromising on recall. By applying experiments and theory to a broad set of architectures, we identify a key tradeoff between a model's state size and recall ability. We show that efficient alternatives to attention (e.g. H3, Mamba, RWKV) maintain a fixed-size recurrent state, but struggle at recall. We propose BASED a simple architecture combining linear and sliding window attention. By varying BASED window size and linear attention feature dimension, we can dial the state size and traverse the pareto frontier of the recall-memory tradeoff curve, recovering the full quality of attention on one end and the small state size of attention-alternatives on the other. We train language models up to 1.3b parameters and show that BASED matches the strongest sub-quadratic models (e.g. Mamba) in perplexity and outperforms them on real-world recall-intensive tasks by 6.22 accuracy points. Implementations of linear attention are often less efficient than optimized standard attention implementations. To make BASED competitive, we develop IO-aware algorithms that enable 24x higher throughput on language generation than FlashAttention-2, when generating 1024 tokens using 1.3b parameter models. Code for this work is provided at: https://github.com/HazyResearch/based.

  • 9 authors
·
Feb 28, 2024 12

Superlinear Multi-Step Attention

In this paper, we propose Superlinear attention, a fully trainable multi-step attention architecture that achieves subquadratic complexity for long sequences while preserving random context access (a.k.a.\ structural non-exclusion): no eligible token position is structurally excluded from being selected for attention. Superlinear attention reformulates standard causal self-attention as a multi-step search problem with N steps, yielding an overall complexity of O(L^{1+1{N}}). To illustrate the architecture, we present a baseline N=2 implementation, which is algorithmically analogous to standard jump search. In this O(L^{3/2}) instantiation, the first step performs O(L^{3/2}) span-search to select relevant spans of the sequence, and the second step applies O(L^{3/2}) span-attention (standard attention restricted to the selected spans). In an upscaled O(L^{1.54}) configuration for robustness, we achieve an average decoding throughput of 114 tokens/sec at 1M context length and 80 tokens/sec at 10M context in our implementation on a modified 30B hybrid MoE model on a single B200 GPU. With limited training, we also obtain strong performance on the NIAH (Needle In A Haystack) task up to 256K context length, demonstrating that the routed span selection is learnable end-to-end. This paper emphasizes architectural formulation, scaling analysis, and systems feasibility, and presents initial validation; comprehensive quality evaluations across diverse long-context tasks are left to future work.

  • 1 authors
·
Jan 26

Massive Activations in Hybrid Linear Attention Large Language Models: Pre-Attention Spikes and Inter-Spike Plateaus

We present the first systematic study of Massive activations (MAs) in layer-interleaved HLA LLMs and uncover two architecture-aligned morphologies: MAs consistently spike immediately before full attention layers, forming pre-attention spikes (PAS), and can persist through intervening linear attention layers, giving rise to inter-spike plateaus (ISP). As full attention becomes denser, successive PAS become increasingly connected through ISP, ultimately recovering the stable MA morphology of full attention LLMs. We establish the recurrence of this organization across five linear attention architectures, six hybridization configurations, five data domains, and representative open-source hybrid models spanning 1.2B to 397B total parameters. Controlled pretraining of GDN-based hybrids at scales up to 1.3B shows that both morphologies emerge early and respond asymmetrically to output gating: full attention output gating strongly attenuates their absolute magnitudes without eliminating their layerwise organization, whereas removing GDN gates yields comparatively modest amplification. Mechanistically, our systematic-outlier analysis supports a shared lifecycle account governed by the timing of MA cancellation. PAS follows a localized write-sink-cancel process, while the extended persistence of ISP is consistent with delayed cancellation. At the full attention limit, this account recovers the stable MA morphology characteristic of full attention LLMs. Our code is available at https://github.com/StartluxLabs/Massive-Activations-HLA.

startlux-models StartLux
·
Aug 11 4

Various Lengths, Constant Speed: Efficient Language Modeling with Lightning Attention

We present Lightning Attention, the first linear attention implementation that maintains a constant training speed for various sequence lengths under fixed memory consumption. Due to the issue with cumulative summation operations (cumsum), previous linear attention implementations cannot achieve their theoretical advantage in a casual setting. However, this issue can be effectively solved by utilizing different attention calculation strategies to compute the different parts of attention. Specifically, we split the attention calculation into intra-blocks and inter-blocks and use conventional attention computation for intra-blocks and linear attention kernel tricks for inter-blocks. This eliminates the need for cumsum in the linear attention calculation. Furthermore, a tiling technique is adopted through both forward and backward procedures to take full advantage of the GPU hardware. To enhance accuracy while preserving efficacy, we introduce TransNormerLLM (TNL), a new architecture that is tailored to our lightning attention. We conduct rigorous testing on standard and self-collected datasets with varying model sizes and sequence lengths. TNL is notably more efficient than other language models. In addition, benchmark results indicate that TNL performs on par with state-of-the-art LLMs utilizing conventional transformer structures. The source code is released at github.com/OpenNLPLab/TransnormerLLM.

  • 6 authors
·
May 27, 2024 2

LoGo: Token-Level Dynamic Local-Global Attention

As context lengths scale, attention increasingly becomes a primary computational bottleneck in large language models. Standard Transformers remain powerful but computationally inefficient, as they allocate the same attention budget to every token regardless of its contextual demand. Existing local-global hybrids provide a more efficient alternative by mixing restricted- and full-context attention, but they typically allocate span statically across layers or heads. To address these limitations, we propose LoGo, a token-level dynamic local-global attention mechanism that uses attention span as a direct proxy for attention budget allocation. Each LoGo layer contains coupled local and global branches: all tokens receive efficient local attention over a restricted context window, while a learned gate activates global attention with full-context access only for tokens requiring long-range information. A threshold-based budget controller maintains a target global ratio without auxiliary losses, and a progressive masking schedule stabilizes training before sparse routing takes effect. We further implement query-sparse Triton kernels that convert reduced global-attention computation into practical speedups. Extensive experiments validate LoGo's effectiveness, showing that it preserves the scaling behavior of full-attention Transformers across model sizes. In controlled comparisons, LoGo improves over the full-attention Transformer and matched-budget static local-global hybrids, with clear gains on long-range retrieval. Analysis further shows that LoGo learns interpretable span allocation patterns. These results suggest that learned token-level span allocation is an effective and scalable way to improve the long-context performance-compute trade-off.

  • 5 authors
·
Aug 29

HiP Attention: Sparse Sub-Quadratic Attention with Hierarchical Attention Pruning

In modern large language models (LLMs), increasing sequence lengths is a crucial challenge for enhancing their comprehension and coherence in handling complex tasks such as multi-modal question answering. However, handling long context sequences with LLMs is prohibitively costly due to the conventional attention mechanism's quadratic time and space complexity, and the context window size is limited by the GPU memory. Although recent works have proposed linear and sparse attention mechanisms to address this issue, their real-world applicability is often limited by the need to re-train pre-trained models. In response, we propose a novel approach, Hierarchically Pruned Attention (HiP), which simultaneously reduces the training and inference time complexity from O(T^2) to O(T log T) and the space complexity from O(T^2) to O(T). To this end, we devise a dynamic sparse attention mechanism that generates an attention mask through a novel tree-search-like algorithm for a given query on the fly. HiP is training-free as it only utilizes the pre-trained attention scores to spot the positions of the top-k most significant elements for each query. Moreover, it ensures that no token is overlooked, unlike the sliding window-based sub-quadratic attention methods, such as StreamingLLM. Extensive experiments on diverse real-world benchmarks demonstrate that HiP significantly reduces prompt (i.e., prefill) and decoding latency and memory usage while maintaining high generation performance with little or no degradation. As HiP allows pretrained LLMs to scale to millions of tokens on commodity GPUs with no additional engineering due to its easy plug-and-play deployment, we believe that our work will have a large practical impact, opening up the possibility to many long-context LLM applications previously infeasible.

  • 7 authors
·
Jun 14, 2024

Priming: Hybrid State Space Models From Pre-trained Transformers

Hybrid State-Space models combine Attention with recurrent State-Space Model (SSM) layers, balancing eidetic memory from Attention with compressed fading memory from SSMs. This yields smaller Key-Value caches and faster decoding than Transformers, along with a richer architectural design space. Exploring that design space at scale has so far required training from scratch, a barrier that has kept most large-model Hybrid research within a narrow range of architectures. We introduce Priming, a method that turns Hybrid architecture design from a pre-training problem into a knowledge transfer one. Priming initializes a Hybrid model from a pre-trained Transformer and, through short alignment and post-training phases, recovers downstream quality using less than 0.5% of the source model's pre-training token budget. Priming is agnostic to the source Transformer family (e.g., Qwen, Llama, Mistral), model class (dense or Mixture-of-Experts), and model scale. Priming enables us to run the first controlled comparison of SSM layer types at scale under identical conditions. We evaluate, Gated KalmaNet (GKA), Gated DeltaNet (GDN), and Mamba-2, and show that their expressiveness hierarchy, GKA>GDN>Mamba-2, directly predicts downstream performance on long-context reasoning tasks. We scale Priming to 8B/32B reasoning models with native 128K contexts. Our Hybrid GKA 32B improves over its source Qwen3-32B by +3.8 average reasoning points, while staying within 1% of a Transformer post-trained on the same data and enabling up to 2.3x higher decode throughput. To foster research on Hybrid architectures, we release a model zoo of primed Hybrid models for long-context reasoning and instruction following, together with the Priming training and inference code (Sequence Parallelism algorithms for long-context training, optimized GKA kernels, and vLLM serving plugin), all under Apache~2.0 License.

  • 9 authors
·
May 7

RCMHA: Relative Convolutional Multi-Head Attention for Natural Language Modelling

The Attention module finds common usage in language modeling, presenting distinct challenges within the broader scope of Natural Language Processing. Multi-Head Attention (MHA) employs an absolute positional encoding, which imposes limitations on token length and entails substantial memory consumption during the processing of embedded inputs. The current remedy proposed by researchers involves the utilization of relative positional encoding, similar to the approach adopted in Transformer-XL or Relative Multi-Head Attention (RMHA), albeit the employed architecture consumes considerable memory resources. To address these challenges, this study endeavors to refine MHA, leveraging relative positional encoding in conjunction with the Depth-Wise Convolutional Layer architecture, which promises heightened accuracy coupled with minimized memory usage. The proposed RCMHA framework entails the modification of two integral components: firstly, the application of the Depth-Wise Convolutional Layer to the input embedding, encompassing Query, Key, and Value parameters; secondly, the incorporation of Relative Positional Encoding into the attention scoring phase, harmoniously integrated with Scaled Dot-Product Attention. Empirical experiments underscore the advantages of RCMHA, wherein it exhibits superior accuracy, boasting a score of 0.572 in comparison to alternative attention modules such as MHA, Multi-DConv-Head Attention (MDHA), and RMHA. Concerning memory utilization, RMHA emerges as the most frugal, demonstrating an average consumption of 2.98 GB, surpassing RMHA which necessitates 3.5 GB.

  • 3 authors
·
Aug 7, 2023

Zoology: Measuring and Improving Recall in Efficient Language Models

Attention-free language models that combine gating and convolutions are growing in popularity due to their efficiency and increasingly competitive performance. To better understand these architectures, we pretrain a suite of 17 attention and "gated-convolution" language models, finding that SoTA gated-convolution architectures still underperform attention by up to 2.1 perplexity points on the Pile. In fine-grained analysis, we find 82% of the gap is explained by each model's ability to recall information that is previously mentioned in-context, e.g. "Hakuna Matata means no worries Hakuna Matata it means no" rightarrow "??". On this task, termed "associative recall", we find that attention outperforms gated-convolutions by a large margin: a 70M parameter attention model outperforms a 1.4 billion parameter gated-convolution model on associative recall. This is surprising because prior work shows gated convolutions can perfectly solve synthetic tests for AR capability. To close the gap between synthetics and real language, we develop a new formalization of the task called multi-query associative recall (MQAR) that better reflects actual language. We perform an empirical and theoretical study of MQAR that elucidates differences in the parameter-efficiency of attention and gated-convolution recall. Informed by our analysis, we evaluate simple convolution-attention hybrids and show that hybrids with input-dependent sparse attention patterns can close 97.4% of the gap to attention, while maintaining sub-quadratic scaling. Our code is accessible at: https://github.com/HazyResearch/zoology.

  • 8 authors
·
Dec 8, 2023

Unveiling and Harnessing Hidden Attention Sinks: Enhancing Large Language Models without Training through Attention Calibration

Attention is a fundamental component behind the remarkable achievements of large language models (LLMs). However, our current understanding of the attention mechanism, especially regarding how attention distributions are established, remains limited. Inspired by recent studies that explore the presence of attention sink in the initial token, which receives disproportionately large attention scores despite their lack of semantic importance, this work delves deeper into this phenomenon. We aim to provide a more profound understanding of the existence of attention sinks within LLMs and to uncover ways to enhance the achievable accuracy of LLMs by directly optimizing the attention distributions, without the need for weight finetuning. Specifically, this work begins with comprehensive visualizations of the attention distributions in LLMs during inference across various inputs and tasks. Based on these visualizations, to the best of our knowledge, we are the first to discover that (1) attention sinks occur not only at the start of sequences but also within later tokens of the input, and (2) not all attention sinks have a positive impact on the achievable accuracy of LLMs. Building upon our findings, we propose a training-free Attention Calibration Technique (ACT) that automatically optimizes the attention distributions on the fly during inference in an input-adaptive manner. Extensive experiments validate that ACT consistently enhances the accuracy of various LLMs across different applications. Specifically, ACT achieves an average improvement of up to 7.30% in accuracy across different datasets when applied to Llama-30B. Our code is available at https://github.com/GATECH-EIC/ACT.

  • 6 authors
·
Jun 22, 2024

Kimi Linear: An Expressive, Efficient Attention Architecture

We introduce Kimi Linear, a hybrid linear attention architecture that, for the first time, outperforms full attention under fair comparisons across various scenarios -- including short-context, long-context, and reinforcement learning (RL) scaling regimes. At its core lies Kimi Delta Attention (KDA), an expressive linear attention module that extends Gated DeltaNet with a finer-grained gating mechanism, enabling more effective use of limited finite-state RNN memory. Our bespoke chunkwise algorithm achieves high hardware efficiency through a specialized variant of the Diagonal-Plus-Low-Rank (DPLR) transition matrices, which substantially reduces computation compared to the general DPLR formulation while remaining more consistent with the classical delta rule. We pretrain a Kimi Linear model with 3B activated parameters and 48B total parameters, based on a layerwise hybrid of KDA and Multi-Head Latent Attention (MLA). Our experiments show that with an identical training recipe, Kimi Linear outperforms full MLA with a sizeable margin across all evaluated tasks, while reducing KV cache usage by up to 75% and achieving up to 6 times decoding throughput for a 1M context. These results demonstrate that Kimi Linear can be a drop-in replacement for full attention architectures with superior performance and efficiency, including tasks with longer input and output lengths. To support further research, we open-source the KDA kernel and vLLM implementations, and release the pre-trained and instruction-tuned model checkpoints.

moonshotai Moonshot AI
·
Oct 30, 2025 4

LycheeDecode: Accelerating Long-Context LLM Inference via Hybrid-Head Sparse Decoding

The proliferation of long-context large language models (LLMs) exposes a key bottleneck: the rapidly expanding key-value cache during decoding, which imposes heavy memory and latency costs. While recent approaches attempt to alleviate this by sharing a single set of crucial tokens across layers, such coarse-grained sharing undermines model performance by neglecting the functional diversity of attention heads. To address this, we propose LycheeDecode, an efficient decoding method centered on a fine-grained hybrid-head attention mechanism that employs a hardware-efficient top-k selection strategy. Specifically, the novel HardKuma-based mechanism partitions attention heads into a small subset of retrieval heads that dynamically identify crucial tokens and a majority of sparse heads that reuse them for efficient computation. Through extensive experiments on leading models like Llama3 and Qwen3 across diverse benchmarks for long-context understanding (e.g., LongBench, RULER) and complex reasoning (e.g., AIME24, OlympiadBench), we demonstrate that LycheeDecode achieves generative quality comparable to, and at times surpassing even the full-attention baseline. Crucially, this is accomplished with up to a 2.7x speedup at a 128K context length. By preserving the functional diversity of attention heads, our fine-grained strategy overcomes the performance bottlenecks of existing methods, providing a powerful and validated pathway to both efficient and high-quality long-context LLM inference.

HIT-TMG Lychee Team
·
Feb 4 3

A Little Goes a Long Way: Efficient Long Context Training and Inference with Partial Contexts

Training and serving long-context large language models (LLMs) incurs substantial overhead. To address this, two critical steps are often required: a pretrained LLM typically undergoes a separate stage for context length extension by training on long-context data, followed by architectural modifications to reduce the overhead of KV cache during serving. This paper argues that integrating length extension with a GPU-friendly KV cache reduction architecture not only reduces training overhead during length extension, but also achieves better long-context performance. This leads to our proposed LongGen, which finetunes a pretrained LLM into an efficient architecture during length extension. LongGen builds on three key insights: (1) Sparse attention patterns, such as window attention (attending to recent tokens), attention sink (initial ones), and blockwise sparse attention (strided token blocks) are well-suited for building efficient long-context models, primarily due to their GPU-friendly memory access patterns, enabling efficiency gains not just theoretically but in practice as well. (2) It is essential for the model to have direct access to all tokens. A hybrid architecture with 1/3 full attention layers and 2/3 efficient ones achieves a balanced trade-off between efficiency and long-context performance. (3) Lightweight training on 5B long-context data is sufficient to extend the hybrid model's context length from 4K to 128K. We evaluate LongGen on both Llama-2 7B and Llama-2 70B, demonstrating its effectiveness across different scales. During training with 128K-long contexts, LongGen achieves 1.55x training speedup and reduces wall-clock time by 36%, compared to a full-attention baseline. During inference, LongGen reduces KV cache memory by 62%, achieving 1.67x prefilling speedup and 1.41x decoding speedup.

  • 5 authors
·
Oct 2, 2024

Olmo Hybrid: From Theory to Practice and Back

Recent work has demonstrated the potential of non-transformer language models, especially linear recurrent neural networks (RNNs) and hybrid models that mix recurrence and attention. Yet there is no consensus on whether the potential benefits of these new architectures justify the risk and effort of scaling them up. To address this, we provide evidence for the advantages of hybrid models over pure transformers on several fronts. First, theoretically, we show that hybrid models do not merely inherit the expressivity of transformers and linear RNNs, but can express tasks beyond both, such as code execution. Putting this theory to practice, we train Olmo Hybrid, a 7B-parameter model largely comparable to Olmo 3 7B but with the sliding window layers replaced by Gated DeltaNet layers. We show that Olmo Hybrid outperforms Olmo 3 across standard pretraining and mid-training evaluations, demonstrating the benefit of hybrid models in a controlled, large-scale setting. We find that the hybrid model scales significantly more efficiently than the transformer, explaining its higher performance. However, its unclear why greater expressivity on specific formal problems should result in better scaling or superior performance on downstream tasks unrelated to those problems. To explain this apparent gap, we return to theory and argue why increased expressivity should translate to better scaling efficiency, completing the loop. Overall, our results suggest that hybrid models mixing attention and recurrent layers are a powerful extension to the language modeling paradigm: not merely to reduce memory during inference, but as a fundamental way to obtain more expressive models that scale better during pretraining.

  • 22 authors
·
Apr 6

Lightning Attention-2: A Free Lunch for Handling Unlimited Sequence Lengths in Large Language Models

Linear attention is an efficient attention mechanism that has recently emerged as a promising alternative to conventional softmax attention. With its ability to process tokens in linear computational complexities, linear attention, in theory, can handle sequences of unlimited length without sacrificing speed, i.e., maintaining a constant training speed for various sequence lengths with a fixed memory consumption. However, due to the issue with cumulative summation (cumsum), current linear attention algorithms cannot demonstrate their theoretical advantage in a causal setting. In this paper, we present Lightning Attention-2, the first linear attention implementation that enables linear attention to realize its theoretical computational benefits. To achieve this, we leverage the thought of tiling, separately handling the intra-block and inter-block components in linear attention calculation. Specifically, we utilize the conventional attention computation mechanism for the intra-blocks and apply linear attention kernel tricks for the inter-blocks. A tiling technique is adopted through both forward and backward procedures to take full advantage of the GPU hardware. We implement our algorithm in Triton to make it IO-aware and hardware-friendly. Various experiments are conducted on different model sizes and sequence lengths. Lightning Attention-2 retains consistent training and inference speed regardless of input sequence length and is significantly faster than other attention mechanisms. The source code is available at https://github.com/OpenNLPLab/lightning-attention.

  • 6 authors
·
Jan 9, 2024 3

Landmark Attention: Random-Access Infinite Context Length for Transformers

While transformers have shown remarkable success in natural language processing, their attention mechanism's large memory requirements have limited their ability to handle longer contexts. Prior approaches, such as recurrent memory or retrieval-based augmentation, have either compromised the random-access flexibility of attention (i.e., the capability to select any token in the entire context) or relied on separate mechanisms for relevant context retrieval, which may not be compatible with the model's attention. In this paper, we present a novel approach that allows access to the complete context while retaining random-access flexibility, closely resembling running attention on the entire context. Our method uses a landmark token to represent each block of the input and trains the attention to use it for selecting relevant blocks, enabling retrieval of blocks directly through the attention mechanism instead of by relying on a separate mechanism. Our approach seamlessly integrates with specialized data structures and the system's memory hierarchy, enabling processing of arbitrarily long context lengths. We demonstrate that our method can obtain comparable performance with Transformer-XL while significantly reducing the number of retrieved tokens in each step. Finally, we show that fine-tuning LLaMA 7B with our method successfully extends its context length capacity up to 32k tokens, allowing for inference at the context lengths of GPT-4.

  • 2 authors
·
May 25, 2023 1

Long-Context Attention Benchmark: From Kernel Efficiency to Distributed Context Parallelism

Transformer-based large language models (LLMs) have achieved remarkable success, yet their standard attention mechanism incurs quadratic computation and memory costs with respect to sequence length, posing a major bottleneck for long-context training. Prior work tackles this challenge along two directions: (1) kernel-level optimizations, which accelerate dense and sparse attention operators; and (2) module-level strategies, often referred to as distributed attention or context parallel training, which scale attention across multiple devices. However, systematic evaluation still remains limited: operator-level comparisons are often incomplete, while context parallel strategies are typically framework-specific, with unclear performance analysis across contexts. To address these gaps, we propose a unified benchmark that integrates representative attention kernels and context parallel mechanisms with a modular and extensible interface for evaluation. The benchmark evaluates methods along two critical dimensions: (1) attention mask patterns, which strongly affect efficiency, scalability, and usability, and (2) sequence length and distributed scale, which determine performance under extreme long-context training. Through comprehensive experiments on the cluster of up to 96 GPUs, our benchmark enables reproducible comparisons, highlights method-specific trade-offs, and provides practical guidance for designing and deploying attention mechanisms in long-context LLM training.

  • 7 authors
·
Oct 19, 2025 2

S^3-Attention:Attention-Aligned Endogenous Retrieval for Memory-Bounded Long-Context Inference

Large language models are increasingly applied to multi-document and long-form inputs, yet long-context inference remains memory- and noise-inefficient. Key-value (KV) caching scales linearly with context length, while external retrieval methods often return lexically similar but causally irrelevant passages. We present S3-Attention, a memory-first inference-time framework that treats long-context processing as attention-aligned endogenous retrieval. S3-Attention decodes transient key and query projections into top-k sparse feature identifiers using lightweight sparse autoencoders, and constructs a CPU-based inverted index mapping features to token positions or spans during a single streaming scan. This design allows the KV cache to be discarded entirely and bounds GPU memory usage by the scan chunk size. At generation time, feature co-activation is used to retrieve compact evidence spans, optionally fused with BM25 for exact lexical matching. Under a unified LongBench evaluation protocol with fixed prompting, decoding, and matched token budgets, S3-Hybrid closely matches full-context inference across multiple model families and improves robustness in several information-dense settings. We also report an engineering limitation of the current prototype, which incurs higher wall-clock latency than optimized full-KV baselines, motivating future kernel-level optimization.

  • 10 authors
·
Jan 27